Guru Santhi Electronics

Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

High-Temperature Features: • Ambient Temperature Range of -40°C to +150°C Power-Managed Modes: • Run: CPU on, Peripherals on • Idle: CPU off, Peripherals on • Sleep: CPU off, Peripherals off • Two-Speed Oscillator Start-up • Fail-Safe Clock Monitor (FSCM) • Power-Saving Peripheral Module Disable (PMD) • Ultra Low-Power Wake-up • Fast Wake-up, 1 µs, Typical • Low-Power WDT, 300 nA, Typical • Run mode Currents Down to Very Low 3.8 µA, Typical • Idle mode Currents Down to Very Low 880 nA, Typical • Sleep mode Currents Down to Very Low 13 nA, Typical ECAN Bus Module Features: • Conforms to CAN 2.0B Active Specification • Three Operating modes: - Legacy mode (full backward compatibility with existing PIC18CXX8/FXX8 CAN modules) - Enhanced mode - FIFO mode or programmable TX/RX buffers • Message Bit Rates up to 1 Mbps • DeviceNet™ Data Byte Filter Support

Devices Included In This Data Sheet: PIC16F722/3/4/6/7 Devices: PIC16LF722/3/4/6/7 Devices: High-Performance RISC CPU: • Only 35 Instructions to Learn: - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Up to 8K x 14 Words of Flash Program Memory • Up to 368 Bytes of Data Memory (RAM) • Interrupt Capability • 8-Level Deep Hardware Stack • Direct, Indirect and Relative Addressing modes • Processor Read Access to Program Memory • Pinout Compatible to other 28/40-pin PIC16CXXX and PIC16FXXX Microcontrollers Special Microcontroller Features: • Precision Internal Oscillator: - 16 MHz or 500 kHz operation - Factory calibrated to ±1%, typical - Software tunable - Software selectable ÷1, ÷2, ÷4 or ÷8 divider • 1.8V-5.5V Operation – PIC16F722/3/4/6/7 • 1.8V-3.6V Operation – PIC16LF722/3/4/6/7 • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Brown-out Reset (BOR): - Selectable between two trip points - Disable in Sleep option • Programmable Code Protection • In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins • Multiplexed Master Clear with Pull-up/Input Pin • Industrial and Extended Temperature Range • High-Endurance Flash Cell: - 1,000 write Flash endurance (typical) - Flash retention: > 40 years • Power-Saving Sleep mode Extreme Low-Power Management PIC16LF722/3/4/6/7 with XLP: • Sleep Mode: 20 nA • Watchdog Timer: 500 nA • Timer1 Oscillator: 600 nA @ 32 kHz Analog Features: • A/D Converter: - 8-bit resolution and up to 14 channels - Conversion available during Sleep - Selectable 1.024/2.048/4.096V voltage reference • On-chip 3.2V Regulator (PIC16F722/3/4/6/7 devices only) Peripheral Highlights: • Up to 35 I/O Pins and One Input-only Pin: - High-current source/sink for direct LED drive - Interrupt-on-pin change - Individually programmable weak pull-ups • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Enhanced Timer1: - Dedicated low-power 32 kHz oscillator - 16-bit timer/counter with prescaler - External Gate Input mode with Toggle and Single Shot modes - Interrupt-on-gate completion • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Two Capture, Compare, PWM (CCP) Modules: - 16-bit Capture, max. resolution 12.5 ns - 16-bit Compare, max. resolution 200 ns - 10-bit PWM, max. frequency 20 kHz • Addressable Universal Synchronous Asynchronous Receiver Transmitter (AUSART) • Synchronous Serial Port (SSP): - SPI (Master/Slave) - I2C (Slave) with Address Mask • mTouch® Sensing Oscillator Module: - Up to 16 in

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

With years of experience in the field of electronics we can provide electronic components at competitive price with best quality. We provide complete of BOM support for our customers with timely delivery of goods. 

IC PIC16F15355-I/SO-8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C

8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C






8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C






8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C





8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C



8-bit Microcontrollers - MCU 14KB, 1KB RAM, 4xPWMs, Comparator, DAC, ADC, CWG, 4xCLC, 2 EUSART, SPI/I2C

Key feature:-

• Power rating: 0.25 Watt (1/4W)

• High precision and stability

• Low tolerance values (commonly ±1% or ±2%)

• Resistance range available from a few ohms to megaohms

• Low noise and reliable performance

• Good temperature coefficient for consistent operation

• Axial leaded design for easy PCB mounting

• Suitable for electronic circuits, power supplies, and testing equipment

• Long service life with high durability

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle. ??? Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No parity, Data control: has. Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. ??? Given a rising pulse in PIO0, device will be disconnected. ??? Status instruction port PIO1: low-disconnected, high-connected; ??? PIO10 and PIO11 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s. ??? Auto-connect to the last device on power as default. ??? Permit pairing device to connect as default. ??? Auto-pairing PINCODE:”0000” as default ??? Auto-reconnect in 30 min when disconnected as a result of beyond the range of connection

We offer wide variety of Resistor ranging from CFR to MFR and tolerance level from 1% to 5% with competitive price. Share your requirements and get the best price.

Samwha Aluminum Electrolytic Capacitor is a polarized capacitor designed for energy storage, filtering, coupling, and decoupling applications in electronic circuits. Known for high reliability, long service life, and stable capacitance, it performs well in both AC and DC applications. These capacitors are widely used in power supplies, audio equipment, industrial electronics, and consumer devices. With various voltage and capacitance ratings, they offer efficient ripple current handling, low ESR, and durable construction for consistent circuit performance.

PIC16F690-I/P-8-bit Microcontrollers - MCU 7KB FL 256R 18 I/O8-bit Microcontrollers - MCU 7KB FL 256R 18 I/O

Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

• Only 35 single-word instructions to learn • All single-cycle instructions except for program branches, which are two-cycle • Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle • Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory • Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers

High-Performance RISC CPU: • C Compiler Optimized Architecture: - Optional extended instruction set designed to optimize re-entrant code • Up to 1024 Bytes Data EEPROM • Up to 64 Kbytes Linear Program Memory Addressing • Up to 3896 Bytes Linear Data Memory Addressing • Up to 16 MIPS Operation • 16-bit Wide Instructions, 8-bit Wide Data Path • Priority Levels for Interrupts • 31-Level, Software Accessible Hardware Stack • 8 x 8 Single-Cycle Hardware Multiplier

PIC16F882-I/SP-8-bit Microcontrollers - MCU 3.5KB Enhanced Flash 128 RAM 25 I/O8-bit Microcontrollers - MCU 3.5KB Enhanced Flash 128 RAM 25 I/O

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

General Purpose Input/Output Interface (GPIO)ESP8266EX has 17 GPIO pins which can be assigned to various functions by programming the appropriate registers. Each GPIO can be configured with internal pull-up or pull-down, or set to high impedance, and when configured as an input, the data are stored in software registers; the input can also be set to edge-trigger or level trigger CPU interrupts. In short, the IO pads are bi-directional, non-inverting and tristate, which includes input and output buffer with tristate control inputs. These pins can be multiplexed with other functions such as I2C, I2S, UART, PWM, IR Remote Control, etc. For low power operations, the GPIOs can also be set to hold their state. For instance, when the chip is powered down, all output enable signals can be set to hold low. Optional hold functionality can be built into the IO if requested. When the IO is not driven by the internal or external circuitry, the hold functionality can be used to hold the state to the last used state. The hold functionality introduces some positive feedback into the pad. Hence, the external driver that drives the pad must be stronger than the positive feedback. The required drive strength is small — in the range of 5μA to p

Information in this document, including url references, is subject to change without notice. This document is provided "as is" with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification or sample. All liability, including liability for infringement of any proprietary rights, relating to use of information in this document is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual property rights are granted herein. The wi-fi alliance member logo is a trademark of the wi-fi alliance. All trade names, trademarks and registered trademarks mentioned in this document are property of their respective owners, and are hereby acknowledged. Copyright © 2013 espressif systems inc. All rights reserved.

High performance RISC CPU

• only 49 instructions to learn:

all single cycle instrucrions except branches

• operating speed:

DC-32MHz oscillator/clock input
DC-125ns instruction cycle
upto 8 kbytes linear data memory addressing
interrupt capability with automatic context saving
16-level deep hardware stack  with optional overflow/underflow reset
direct ,indirect and relative addressing modes:
-two full 16-bit file select registers(FSRs)
FSRs can read program and data memory

Flexible oscilliator structure

• precision 32 MHz internal oscilliator block:

-factory calibrated to 1% typical
-software selectable frequencies range of 31kHz to 32 MHz

ONOR SAMPLE. All liability, including liability for infringement of any proprietary rights, relating to usedocument is disclaimed. No licenses express or implied, by estoppel orThe WiFi Alliance Member Logo is a trademark of the WiFi Alliance.All trade names, trademarks and registered trademarks mentioned in this document are property ofhereby acknowledged.Copyright © 2015 AI-Thinker team.All rights reservedNoticeProduct version upgrades or other reasons, possible changes inotice or indication of the circumstances the right to modify the content of this manual. This manual is used make every effort to provide accurate information in this manual, but this manual all statements, information and advice nor does it constitute any express or impESP-01 WiFi ModuleInformation in this document, including URL references, is subject to change without notice. DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANYWARRANTY OF MERCHANTABILITY, NONPURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, g liability for infringement of any proprietary rights, relating to usedocument is disclaimed. No licenses express or implied, by estoppel orotherwise, to any intellectual property rights are granted herein.r Logo is a trademark of the WiFi Alliance.All trade names, trademarks and registered trademarks mentioned in this document are property oftheir respective owners, and are All rights reserved.Product version upgrades or other reasons, possible changes in the contents of this manual. AI-Thinker reserves inotice or indication of the circumstances the right to modify the content of this manual. This manual is used only as a guide, make every effort to provide accurate information in this manual, but Ai-thinker does not ensure that manual content without error, in this manual all statements, information and advice nor does it constitute any express or implied warranty.01 WiFi ModuleVersion1.0DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANYWARRANTY OF MERCHANTABILITY, NON-PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, g liability for infringement of any proprietary rights, relating to useof information in this otherwise, to any intellectual property rights are granted herein.their respective owners, and are Thinker reserves in the absence of any only as a guide, Ai-thinker does not ensure that manual content without error, in sherry@aithinker.com

1 Functional description1.1 OverviewThe NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance u-blox 6positioning engine. These flexible and cost effective receivers offer numerous connectivity options in a miniature16 x 12.2 x 2.4 mm package. Their compact architecture and power and memory options make NEO-6 modulesideal for battery operated mobile devices with very strict cost and space constraints.The 50-channel u-blox 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicatedacquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches,enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources andmitigates multipath effects, giving NEO-6 GPS receivers excellent navigation performance even in the mostchallenging environments

Devices Included In This Data Sheet: PIC16F722A/723A Devices: PIC16LF722A/723A Devices: High-Performance RISC CPU: • Only 35 Instructions to Learn: - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Up to 4K x 14 Words of Flash Program Memory • Up to 192 Bytes of Data Memory (RAM) • Interrupt Capability • 8-Level Deep Hardware Stack • Direct, Indirect and Relative Addressing modes • Processor Read Access to Program Memory • Pinout Compatible to other 28-pin PIC16CXXX and PIC16FXXX Microcontrollers Special Microcontroller Features: • Precision Internal Oscillator: - 16 MHz or 500 kHz operation - Factory-calibrated to ±1%, typical - Software tunable - Software selectable ÷1, ÷2, ÷4 or ÷8 divider • 1.8V-5.5V Operation – PIC16F722A/723A • 1.8V-3.6V Operation – PIC16LF722A/723A • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Brown-out Reset (BOR): - Selectable between two trip points - Disable in Sleep option • Programmable Code Protection • In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins • Multiplexed Master Clear with Pull-up/Input Pin • Industrial and Extended Temperature Range • Power-Saving Sleep mode Extreme Low-Power Management PIC16LF722A/723A with XLP: • Sleep Mode: 20 nA • Watchdog Timer: 500 nA • Timer1 Oscillator: 600 nA @ 32 kHz Analog Features: • A/D Converter: - 8-bit resolution, 11 channels - Conversion available during Sleep - Selectable 1.024/2.048/4.096V voltage reference • On-chip 3.2V Regulator (PIC16F722A/723A devices only)

8-bit Microcontrollers - MCU 128KB Flash, 4KB RAM, 256B EEPROM, 10b ADC2, 5b DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD

High-Performance RISC CPU: • Only 49 Instructions to Learn: - All single-cycle instructions except branches • Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle • Up to 16K x 14 Words of Flash Program Memory • Up to 1024 Bytes of Data Memory (RAM) • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack • Direct, Indirect and Relative Addressing modes • Processor Read Access to Program Memory • Pinout Compatible to other 28-pin PIC16CXXX and PIC16FXXX Microcontrollers

Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act

Key feature:-

• Available in standard SMD sizes: 1206, 0805, 0603, 0402

• Compact surface-mount design for space-saving PCB layouts

• Wide resistance range (from a few ohms to megaohms)

• Power ratings vary with size (typically 1/16W to 1/4W)

• Low tolerance options (±1%, ±2%, ±5%) for precision circuits

• Stable performance with low noise and good temperature coefficient

• Suitable for automated pick-and-place assembly

1N5363B 30V 5W ZENER DIODES
Zener Diodes Zener Diode, DO-201, 30V, 5W, 5%
Zener Diodes Zener Diode, DO-201, 30V, 5W, 5%

Features • 2 data-line protection • Protects VBUS • Very low capacitance: 3.5 pF max. • Very low leakage current: 150 nA max. • SOT-666 and SOT23-6L packages • RoHS compliant Benefits • Very low capacitance between lines to GND for optimized data integrity and speed • Low PCB space consumption: 2.9 mm² max for SOT-666 and 9 mm² max for SOT23-6L • Enhanced ESD protection: IEC 61000-4-2 level 4 compliance guaranteed at device level, hence greater immunity at system level • ESD protection of VBUS • High reliability offered by monolithic integration • Low leakage current for longer operation of battery powered devices • Fast response time • Consistent D+ / D- signal balance: – Very low capacitance matching tolerance

20 MHz clock input DC – 200 ns instruction cycle • Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory • Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers

DESCRIPTION BPV10NF is a PIN photodiode with high speed and high radiant sensitivity in black, T-1¾ plastic package with daylight blocking filter. Filter bandwidth is matched with 870 nm to 950 nm IR emitters. FEATURES • Package type: leaded • Package form: T-1¾ • Dimensions (in mm): Ø 5 • Radiant sensitive area (in mm2): 0.78 • Leads with stand-off • High radiant sensitivity • Daylight blocking filter matched with 870 nm to 950 nm emitters • High bandwidth: > 100 MHz at VR = 12 V • Fast response times • Angle of half sensitivity:   = ± 20° • Material categorization: for definitions of compliance please see  ?99912 APPLICATIONS • High speed detector for infrared radiation • Infrared remote control and free air data transmission systems, e.g. in combination with TSFFxxxx series IR emitter