Guru Santhi Electronics

PIC12F1840-I/SN-8-bit Microcontrollers - MCU 7KB Flash EEPROM 256b nanoWatt8-bit Microcontrollers - MCU 7KB Flash EEPROM 256b nanoWatt

8-bit Microcontrollers - MCU 32KB Flash, 2KB RAM, 256B EEPROM, 10-bit ADC2, 5-bit DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD

PIC18F4520-I/PT-8-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O8-bit Microcontrollers - MCU 32KB 1536 RAM 368-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O






8-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O








8-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O







8-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O








8-bit Microcontrollers - MCU 32KB 1536 RAM 36I/O

• Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

The MP1584EN-LF-Z is a versatile integrated circuit designed for efficient power conversion. Here are its key features:

• Input Voltage Range: 4.5V to 28V
• Output Current: Up to 3A
• Switching Frequency: Adjustable from 100kHz to 1.5MHz
• Efficiency: High efficiency, with a pulse skipping mode for light loads
• Package: Thermally enhanced SOIC8E package
• Applications: Ideal for high voltage power conversion, automotive systems, industrial power systems, distributed power systems, and battery-powered systems

This IC is known for its fast loop response and ease of compensation, making it suitable for a variety of step-down applications. If you need more details or have other questions, feel free to ask!

Guru Santhi Electronics is a top supplier of electronic components in India. At Guru Santhi Electronics, we have a large stock of parts, which allows us to offer competitive prices. Our efficient delivery system ensures that you get your components on time, every time.

We prioritize customer satisfaction and provide excellent support. The team at Guru Santhi Electronics is always ready to help with any questions or technical issues. We source our components from trusted manufacturers and conduct thorough quality checks to ensure reliability.

Whether you need common parts or rare components, Guru Santhi Electronics has a wide range of products to meet your needs. Choose Guru Santhi Electronics for quality, reliability, and great service.

The OPT101 is a monolithic photodiode with on-chip • Single Supply: 2.7 to 36 V transimpedance amplifier. The integrated combination • Photodiode Size: 0.090 inch × 0.090 inch of photodiode and transimpedance amplifier on a (2.29 mm × 2.29 mm) single chip eliminates the problems commonly • Internal 1-MΩ Feedback Resistor encountered in discrete designs, such as leakage • High Responsivity: 0.45 A/W (650 nm) current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases • Bandwidth: 14 kHz at RF = 1 MΩ linearly with light intensity. The amplifier is designed • Low Quiescent Current: 120 μA for single or dual power-supply operation. • Packages: Clear Plastic 8-pin PDIP and J-Lead The 0.09 inch × 0.09 inch (2.29 mm × 2.29 mm) SOP photodiode operates in the photoconductive mode for excellent linearity and low dark current. 2 Applications The OPT101 operates from 2.7 V to 36 V supplies • Medical Instrumentation and quiescent current is only 120 μA. This device is • Laboratory Instrumentation available in clear plastic 8-pin PDIP, and J-lead SOP for surface mounting. The temperature range is 0°C • Position and Proximity Sensors to 70°C.

1. General description The 74LVC1G126 provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (OE). A LOW-level at pin OE causes the output to assume a high-impedance OFF-state. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits • Wide supply voltage range from 1.65 V to 5.5 V • High noise immunity • Complies with JEDEC standard: • JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8B/JESD36 (2.7 V to 3.6 V) • ±24 mA output drive (VCC = 3.0 V) • ESD protection: • HBM JESD22-A114F exceeds 2000 V

Peripheral Features: • High current sink/source I/O pins: 25 mA/25 mA • Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules • Four 16-bit capture input functions • Two 16-bit compare/PWM output functions - Dual Compare mode available • 3-wire SPI modules (supports 4 Frame modes) • I2CTM module supports Multi-Master/Slave mode and 7-bit/10-bit addressing • Addressable UART modules with FIFO buffers Motor Control PWM Module Features: • Six PWM output channels - Complementary or Independent Output modes - Edge and Center-Aligned modes • Four duty cycle generators • Dedicated time base with four modes • Programmable output polarity • Dead-time control for Complementary mode • Manual output control • Trigger for synchronized A/D conversions Quadrature Encoder Interface Module Features: • Phase A, Phase B and Index Pulse input • 16-bit up/down position counter • Count direction status • Position Measurement (x2 and x4) mode • Programmable digital noise filters on inputs • Alternate 16-bit Timer/Counter mode • Interrupt on position counter rollover/underflow 

FEATURES DESCRIPTION 2 The LM6172 is a dual high speed voltage feedback • (Typical Unless Otherwise Noted) amplifier. It is unity-gain stable and provides excellent • Easy to Use Voltage Feedback Topology DC and AC performance. With 100MHz unity-gain • High Slew Rate 3000V/μs bandwidth, 3000V/μs slew rate and 50mA of output • Wide Unity-Gain Bandwidth 100MHz current per channel, the LM6172 offers high performance in dual amplifiers; yet it only consumes • Low Supply Current 2.3mA/Channel 2.3mA of supply current each channel. • High Output Current 50mA/channel The LM6172 operates on ±15V power supply for • Specified for ±15V and ±5V Operation systems requiring large voltage swings, such as ADSL, scanners and ultrasound equipment. It is also APPLICATIONS specified at ±5V power supply for low voltage applications such as portable video systems. • Scanner I-to-V Converters • ADSL/HDSL Drivers The LM6172 is built with TI's advanced VIP III (Vertically Integrated PNP) complementary bipolar • Multimedia Broadcast Systems process. See the LM6171 datasheet for a single • Video Amplifiers amplifier with these same features. • NTSC, PAL and SECAM Systems • ADC/DAC Buffers • Pulse Amplifiers and Peak Detectors

The LNK6666E is an energy-efficient, high-power off-line switcher with accurate primary-side regulation (PSR). It is part of the LS family of integrated circuits, which are low-power Schottky devices that operate on a supply voltage range of 4.75V to 5.25V ¹²³. The IC has a choice of 8 latches or 8 D-type flip-flops in a single package and provides full parallel-access for loading ¹. It also has buffered control inputs and P-N-P inputs that reduce D-C loading on data lines ¹. The IC can operate at a maximum clock frequency of 35 MHz and has a maximum supply current of 40,000 µA ¹.

 

3 Description The OPA373 and OPA374 families of operational amplifiers are low power and low cost with excellent bandwidth (6.5 MHz) and slew rate (5 V/µs). The input range extends 200 mV beyond the rails and the output range is within 25 mV of the rails. The speedpower ratio and small size make them ideal for portable and battery-powered applications. The OPA373 family includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to a standby current that is less than 1 µA. The OPA373 and OPA374 families of operational amplifiers are specified for single or dual power supplies of 2.7 V to 5.5 V, with operation from 2.3 V to 5.5 V. All models are specified for –40°C to 125°C.

Guru Santhi Electronics is a top supplier of electronic components in India. At Guru Santhi Electronics, we have a large stock of parts, which allows us to offer competitive prices. Our efficient delivery system ensures that you get your components on time, every time.We prioritize customer satisfaction and provide excellent support. The team at Guru Santhi Electronics is always ready to help with any questions or technical issues. We source our components from trusted manufacturers and conduct thorough quality checks to ensure reliability.Whether you need common parts or rare components, Guru Santhi Electronics has a wide range of products to meet your needs. Choose Guru Santhi Electronics for quality, reliability, and great service.

Guru Santhi Electronics is a top supplier of electronic components in India. At Guru Santhi Electronics, we have a large stock of parts, which allows us to offer competitive prices. Our efficient delivery system ensures that you get your components on time, every time.

We prioritize customer satisfaction and provide excellent support. The team at Guru Santhi Electronics is always ready to help with any questions or technical issues. We source our components from trusted manufacturers and conduct thorough quality checks to ensure reliability.

Whether you need common parts or rare components, Guru Santhi Electronics has a wide range of products to meet your needs. Choose Guru Santhi Electronics for quality, reliability, and great service.

SDH790XDHN is designed for non-isolated LED driving with built-in high voltage power MOSFET and high voltage JFET. With this structure, inductor current is sensed and closed-loop is formed with the internal error amplifier for high constant current accuracy and high input/output regulation rate. Also, high PF in full range is available due to its own PFC control. Boundary Conduction mode is adopted for decreasing switching loss and improving the conversion efficiency.

SDH790XDHN can realize high power factor without any external integral capacitor.

Peripheral VCC pin and VCC capacitor (to GND) are unnecessary.

Over voltage protection threshold value is set through pin ROVP.

SDH790XDHN integrates various protections, such as output open circuit protection, output short circuit protection, cycle-by-cycle over current protection, and over temperature protection.

SDH790XDHN has ultra low start-up current and operating current, is able to high effectively drive highlight LED in full voltage input range.

TOP250YN is an extended power design flexible integrated Off-line Switcher that uses the same proven topology as TOPSwitch-GX Family ¹. It is a Power Integrations, Inc. product ¹. Some of its features include:

• Extended power range for higher power applications
• No heatsink required up to 34 W using P package
• Features eliminate or reduce cost of external components
• Fully integrated soft-start for minimum stress/overshoot
• Externally programmable accurate current limit
• Wider duty cycle for more power, smaller input capacitor
• Separate line sense and current limit pins on Y/R/F packages
• Line under-voltage (UV) detection: no turn off glitches
• Line overvoltage (OV) shutdown extends line surge limit
• Line feed-forward with maximum duty cycle (DC MAX) reduction rejects line ripple and limits DC MAX at high line
• Frequency jittering reduces EMI and EMI filtering costs
• Regulates to zero load without dummy loading
• 132 kHz frequency reduces transformer/power supply size
• Half frequency option in Y/R/F packages for video applications
• Hysteretic thermal shutdown for automatic fault recovery
• Large thermal hysteresis prevents PC board overheating ¹.

 

The UM3561A is a low-cost, low-power CMOS LSI designed for use in alarm and toy applications. It is a three-siren sound generator that can work down to 2.4 Volts. The integrated circuit includes oscillator and selector circuits, so a compact sound module can be constructed with only a few additional components¹²³.

The features of UM3561 are as follows:

• Four sounds can be selected
• Power on reset
• Typical 3V operating voltage
• A magnetic speaker can be driven by connecting an NPN transistor
• Low-cost
• Low-power CMOS LSI designed for use in alarm and toy applications²

I hope this helps! Let me know if you have any other questions.

The 74HC373N is an octal D-type transparent latch integrated circuit that is part of the 74HC family of high-speed Si-gate CMOS logic devices ¹². It has eight latches with 3-state non-inverting outputs that are ideal for bus-oriented applications ³. The device is designed to operate from a power supply of 2 to 6 volts and has a maximum quiescent current of 4 microamperes ².

The following table summarizes the features of the 74HC373N integrated circuit:

 

These Power MOSFETs have been developed using STMicroelectronics’ unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switch in advanced high-efficiency isolated DC-DC converters for telecom and computer applications, and applications with low gate charge driving requirements

The 74LS374 is an octal D-type transparent latch integrated circuit that features totem-pole 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads ¹²³. It is part of the LS family of integrated circuits, which are low-power Schottky devices that operate on a supply voltage range of 4.75V to 5.25V ⁴¹.

The IC has a choice of 8 latches or 8 D-type flip-flops in a single package and provides full parallel-access for loading ². It also has buffered control inputs and P-N-P inputs that reduce D-C loading on data lines ¹². The IC can operate at a maximum clock frequency of 35 MHz and has a maximum supply current of 40,000 µA ⁴.

 

The SN74LS245 is an octal bus transceiver integrated circuit that belongs to the LS family of low-power Schottky devices. It is designed for asynchronous two-way communication between data buses and features 3-state outputs that drive bus lines directly, PNP inputs that reduce DC loading on bus lines, and hysteresis at bus inputs that improves noise margins¹²³.

The IC has eight bidirectional data lines that can be used to transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can disable the device so that the buses are effectively isolated¹.

The typical propagation delay times port to port is 8 ns, and it can operate at a maximum clock frequency of 30 MHz¹. The following table summarizes the pin configuration and functions of the SN74LS245:

 

8-bit Microcontrollers - MCU 128KB Flash, 3.6KB RAM, 256B EEPROM, 10b ADC2, 5b DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD

Welcome to Guru Santhi Electronics, your trusted source for S4525S Integrated Circuits (ICs) at unbeatable prices. As a leading supplier, we specialize in delivering high-quality ICs to meet your electronic component needs. Count on Guru Santhi Electronics for cost-effective solutions, top-notch performance, and reliable service. Your success is our priority – choose affordability without compromising quality.

 

High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • Three External Clock modes up to 20 MHz

High-Performance RISC CPU: • Only 49 Instructions • Operating Speed: - DC – 32 MHz clock input - DC – 125 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: • Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Memory Features: • Up to 16 KW Flash Program Memory: - Self-programmable under software control - Programmable code protection - Programmable write protection • 256 Bytes of Data EEPROM • Up to 2048 Bytes of RAM High-Performance PWM Controller: • Four Programmable Switch Mode Controller (PSMC) modules: - Digital and/or analog feedback control of PWM frequency and pulse begin/end times - 16-bit Period, Duty Cycle and Phase - 16 ns clock resolution - Supports Single PWM, Complementary, Push-Pull and 3-phase modes of operation - Dead-band control with 8-bit counter - Auto-shutdown and restart - Leading and falling edge blanking - Burst mode

PIC16(L)F19155/56/75/76/85/86 microcontrollers offer eXtreme Low-Power (XLP) LCD drive coupled with Core Independent Peripherals (CIPs) and Intelligent Analog. They are especially suited for battery-powered LCD applications due to an integrated charge pump, high current I/O drive for backlighting, and battery backup of the Real-Time Clock/ Calendar (RTCC). Active clock tuning of the HFINTOSC provides a highly accurate clock source over voltage and temperature. The family also features a new 12-bit ADC controller which can automate Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging, filtering, oversampling and automatic threshold comparison. Other new features include low-power IDLE and DOZE modes, Device Information Area (DIA), and Memory Access Partition (MAP). These low-power products are available in 28/40/44 and 48 pins to support the customer in various LCD and general purpose applications.

Power Management Features with XLP for eXtreme Low Power: • Deep Sleep mode: CPU Off, Peripherals Off, SRAM Off, Currents Down to 9 nA and 700 nA with RTCC: - Able to wake-up on external triggers, programmable WDT or RTCC alarm - Ultra Low-Power Wake-up (ULPWU) • Sleep mode: CPU Off, Peripherals Off, SRAM On, Fast Wake-up, Currents Down to 0.2 ???A, 2V Typical • Idle: CPU Off, SRAM On, Currents Down to 1.7 ???A Typical • Run: CPU On, SRAM On, Currents Down to 5.8 ???A Typical • Timer1 Oscillator w/RTCC: 0.7 ???A, 32 kHz Typical • Watchdog Timer: 0.33 ???A, 2V Typical Flexible Oscillator Structure: • Two External Clock modes, Up to 48 MHz (12 MIPS) • Integrated Crystal/Resonator Driver • Low-Power 31 kHz Internal RC Oscillator • Tunable Internal Oscillator (31 kHz to 8 MHz, ±0.15% Typical, ±1% Max.) • Precision 48 MHz PLL or 4x PLL Options • Low-Power Secondary Oscillator using Timer1 @ 32 kHz • Fail-Safe Clock Monitor (FSCM): - Allows for safe shutdown if any clock stops • Programmable Reference Clock Output Generator Peripheral Highlights: • Peripheral Pin Select: - Allows independent I/O mapping of many peripherals - Continuous hardware integrity checking and safety interlocks prevent unintentional configuration changes • Hardware Real-Time Clock/Calendar (RTCC): - Provides clock, calendar and alarm functions • High-Current Sink/Source 25 mA/25mA (PORTB and PORTC) • Four Programmable External Interrupts • Four Input Change Interrupts • Three Enhanced Capture/Compare/PWM (ECCP) modules: - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart - Pulse steering control

High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • Three External Clock modes up to 20 MHz Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC16LF1508/9) - 2.3V to 5.5V (PIC16F1508/9) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Low-Power Brown-out Reset (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • In-Circuit Debug (ICD) via Two Pins • Power-Saving Sleep mode: - Low-Power Sleep mode - Low-Power BOR (LPBOR) • Integrated Temperature Indicator • 128 Bytes High-Endurance Flash - 100,000 write Flash endurance (minimum) Memory: • Up to 8 Kwords Linear Program Memory Addressing • Up to 512 bytes Linear Data Memory Addressing • High-Endurance Flash Data Memory (HEF) - 128 bytes if nonvolatile data storage - 100k erase/write cycles

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

 Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

 Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

 Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

 Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

• Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

PIC16(L)F18855/75 microcontrollers feature Analog, Core Independent Peripherals and Communication Peripherals, combined with eXtreme Low-Power (XLP) technology for a wide range of general purpose and low-power applications. The family will feature the CRC/SCAN, Hardware Limit Timer (HLT) and Windowed Watchdog Timer (WWDT) to support customers looking to add safety to their application. Additionally, this family includes up to 14 KB of Flash memory, along with a 10-bit ADC with Computation (ADC2) extensions for automated signal analysis to reduce the complexity of the application.

PIC16F1828-I-SS-8-bit Microcontrollers - MCU 7 KB Flash 256b RAM 32 MHz Int. Osc8-bit Microcontrollers - MCU 7 KB Flash 256b RAM 32 MHz Int. Osc

High-Temperature Features: • Ambient Temperature Range of -40°C to +150°C Power-Managed Modes: • Run: CPU on, Peripherals on • Idle: CPU off, Peripherals on • Sleep: CPU off, Peripherals off • Two-Speed Oscillator Start-up • Fail-Safe Clock Monitor (FSCM) • Power-Saving Peripheral Module Disable (PMD) • Ultra Low-Power Wake-up • Fast Wake-up, 1 µs, Typical • Low-Power WDT, 300 nA, Typical • Run mode Currents Down to Very Low 3.8 µA, Typical • Idle mode Currents Down to Very Low 880 nA, Typical • Sleep mode Currents Down to Very Low 13 nA, Typical ECAN Bus Module Features: • Conforms to CAN 2.0B Active Specification • Three Operating modes: - Legacy mode (full backward compatibility with existing PIC18CXX8/FXX8 CAN modules) - Enhanced mode - FIFO mode or programmable TX/RX buffers • Message Bit Rates up to 1 Mbps • DeviceNet™ Data Byte Filter Support

High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • 14 Kbytes Linear Program Memory Addressing • 1024 Bytes Linear Data Memory Addressing • Operating Speed: - DC – 48 MHz clock input - DC – 83 ns instruction cycle - Selectable 3x or 4x PLL for specific frequencies • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) capable of accessing both data or program memory - FSRs can read program and data memory Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC16LF145X) - 2.3V to 5.5V (PIC16F145X) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Brown-Out Reset (BOR) • Low-Power BOR (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Power-Saving Sleep mode • 128 Bytes High-Endurance Flash - 100,000 write Flash endurance (minimum) Universal Serial Bus (USB) Features: • Self-Tuning from USB Host (eliminates need for external crystal) • USB V2.0 Compliant SIE • Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s) • Supports Control, Interrupt, Isochronous and Bulk Transfers • Supports up to Eight Bidirectional Endpoints • 512-Byte Dual Access RAM for USB • Interrupt-on-Change (IOC) on D+/D- for USB Host Detection • Configurable Internal Pull-up Resistors for use with USB Extreme Low-Power Management PIC16LF145X with XLP: • Sleep mode: 25 nA @ 1.8V, typical • Watchdog Timer Current: 290 nA @ 1.8V, typical • Timer1 Oscillator: 600 nA @ 32 kHz, typical • Operating Current: 25 ???A/MHz @ 1.8V, typical Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±0.25%, typical - Software selectable frequency range from 16 MHz to 31 kHz - Tunable to 0.25% across temperature range - 48 MHz with 3x PLL • 31 kHz Low-Power Internal Oscillator • Clock Switching with run from: - Primary Oscillator - Secondary Oscillator (SOSC) - Internal Oscillator • Clock Reference Output: - Clock Prescaler - CLKOUT

Description The PIC18(L)F24/25K42 microcontrollers are available in 28-pin devices. These devices feature a 12-bit ADC with Computation (ADC2) automating Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging, filtering, oversampling and threshold comparison, Temperature Sensor, Vectored Interrupt Controller with fixed latency for handling interrupts, System Bus Arbiter, Direct Memory Access capabilities, UART with support for Asynchronous, DMX, DALI and LIN transmissions, SPI, I2C, memory features like Memory Access Partition (MAP) to support customers in data protection and bootloader applications, and Device Information Area (DIA) which stores factory calibration values to help improve temperature sensor accuracy. Core Features • C Compiler Optimized RISC Architecture • Operating Speed: - Up to 64 MHz clock input - 62.5 ns minimum instruction cycle • Two Direct Memory Access (DMA) Controllers - Data transfers to SFR/GPR spaces from either Program Flash Memory, Data EEPROM or SFR/GPR spaces - User-programmable source and destination sizes - Hardware and software-triggered data transfers • System Bus Arbiter with User-Configurable Priorities for Scanner and DMA1/DMA2 with respect to the main line and interrupt execution • Vectored Interrupt Capability - Selectable high/low priority - Fixed interrupt latency - Programmable vector table base address • 31-Level Deep Hardware Stack • Low-Current Power-on Reset (POR) • Configurable Power-up Timer (PWRT) • Brown-Out Reset (BOR) • Low-Power BOR (LPBOR) Option • Windowed Watchdog Timer (WWDT) - Variable prescaler selection - Variable window size selection - Configurable in hardware or software